English
Plasma Cutter Controller Featured Image
  • Plasma Cutter Controller
  • Plasma Cutter Controller
  • Plasma Cutter Controller
  • Plasma Cutter Controller

Plasma Cutter Controller

• Chinese/English/French/Portuguese/Russian/Denmark/Korean language menu,the menu can be switched only by one key.
• 47 categories different graphics (including grid pattern), chip part and hole part are alternative.
• Support the EIA code (G code) and various FastCAM、FreeNest、SmartNest、旧E software.
• Compact keyboard design and easy to input files.
• Graphics have some operations such as Proportion, Rotate, Mirror.
• Graphics can be arrayed in matrix, interaction, stacked modes.
• Steel plate can be adjusted according any steel side.


Product Detail

Product Tags

Characteristics Of System
• Coordinate system can be customized to support the two dimensional coordinates of all eight kinds.
• All input and output port type and the number can be customized (normally open or normally closed).
• Self-diagnostic function, to diagnose the key status and all the IO status, facilitate inspection and debug.
• Provide a front USB interface for copying files.
• System can be upgraded by USB interface easily, and we provide lifetime upgrade service.
• All functions and techniques can upgrade online and don’ t worry about the after sale service.
• Import and export files by single or all files.
• Display time, week and clock.
• Parameters backup and online upgrade.
• Support the Flame, Plasma, Dusting draw and Demonstration four kinds of mode.
• Including various types of processing parameters to meet the needs of different processes.
• Flame and Plasma are separated in the control IO ports.
• Support THC, two level preheat, three level pierce in flame mode.
• Plasma arc feedback, positioning feedback, automatically shut down the arc at the corner.
• Support edge cutting. It can save the preheat time for the thick steel plate.
• Movement speed can be real-time acceleration, deceleration.
• According to plate thickness, the cutting speed is automatically restricted by a speed limit in the corner, effectively preventing over burn.
• Select row and column manually. F2000 Series Shape Cutting Control System Operation and Installation Manual 7
• Dynamic/static illustration of the process, graphics zoom in / out, dynamically tracking cut-off point under zooming state.
• DSP as core can control the machine move in high speed accurately, stability and in low noise.
• Starting speed and acceleration can be set by your convenience.
• Automatically memorize the working situation and the last cutting point when power off.
• Cutting offset” function can avoid waste the steel plate when the nesting of the plate is calculated wrong.
• Set up different administration authority and the corresponding password to safeguard the interests of equipment manufacturers.
• Long-distance remote control can control the machine to move forward, backward, left, right and cutting start, stop and so on (optional configuration).
• Plasma arc controller support two modes of close arc THC: rate and distance, making machine more stable and safer.
• Monitor: F2100B: 7 inch (800*480), F2300A and F2300B: 8 inch (800*600), F2500A and F2500B: 17 inch high brightness LCD with industrial VGA interface.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories